Be informed. Be challenged. Be inspired.

Health Insight: Forget BMI – there’s a 2,000 year-old technique for measuring body fat that’s more useful

CHRISTIAN YATES, in an article first published on The Conversation, looks at how a principle said to have been established by Archimedes can accurately calculate body-fat percentage…

It’s the start of another year and the body mass index (BMI) is being criticised again. This time a Lancet-commissioned group of experts is denouncing it as a diagnostic tool for obesity. They say that doctors should look at the overall health of a patient when diagnosing obesity, not just rely on this one flawed metric.

BMI is calculated by measuring a person’s mass in kilograms and then dividing that by the square of their height in metres. For recording and diagnostic purposes, anyone with a BMI below 18.5 is classified as “underweight”. The “normal weight” range extends from 18.5 to 24.5 and the “overweight” classification spans 24.5 to 30. “Obesity” is defined as having a BMI above 30.


Statue of Archimedes in a bathtub, demonstrating principle of buoyant force at Madatech, Israel’s National Museum of Science, Technology, and Space. PICTURE: Shutterstock.

Given the health implications related to a diagnosis of obesity, or even of being overweight, you might have assumed that the metric used to diagnose these conditions, the BMI, would have a strong theoretical and experimental basis. Sadly this is far from the truth.

“While it’s true that fatter people typically have a higher BMI, it does not work well as a diagnostic criterion. One of the main problems with BMI is that it can’t distinguish between muscle and fat. This is important because excess body fat is a good predictor of heart disease risk. BMI is not.”

While it’s true that fatter people typically have a higher BMI, it does not work well as a diagnostic criterion. One of the main problems with BMI is that it can’t distinguish between muscle and fat. This is important because excess body fat is a good predictor of heart disease risk. BMI is not.

A recent study suggested if the definition of obesity were instead based on high-percentage body fat, between 15 and 35 per cent of men with non-obese BMIs would be reclassified as obese.

However, it turns out that BMI both under- and over-diagnoses obesity. The same study found that up to half of the people that BMI classified as overweight and over a quarter of BMI-obese individuals were metabolically healthy.

BMI is clearly not an accurate indicator of health. Instead, it would be useful to access a direct measure of the percentage of body fat that is so closely linked to cardiovascular disease. To do that we need to borrow a 2,000-year-old idea from the ancient city-state of Syracuse on the island of Sicily.



This one weird old trick
Around 250BC, Archimedes, the pre-eminent mathematician of antiquity, was asked by Heiro II, king of Syracuse, to help resolve a contentious issue. The king had commissioned a crown of pure gold. After receiving the finished crown and hearing rumours of the metalsmith’s less-than-honest reputation, the king worried that he had been cheated and that the metalsmith had used an alloy of gold and some other cheaper, lighter metal. Archimedes was charged with figuring out if the crown was a dud without taking a sample from it or otherwise disfiguring it.

The illustrious mathematician realised that he would need to calculate the crown’s density. If the crown were less dense than pure gold, he would know the metalsmith had cheated. The density of pure gold was easily calculated by taking a regularly shaped gold block, working out the volume and then weighing it to find its mass. Dividing the mass by the volume gave the density. So far, so good.

Weighing the crown was easy enough, but the problem came when trying to work out its volume, because of its irregular shape. This problem stumped Archimedes for some time, until one day he decided to take a bath.

As he got into his extremely full tub, he noticed that some of the water overflowed. As he wallowed, he realised that the volume of water that overflowed from a completely full bath would be equal to the submersed volume of his irregularly shaped body. Immediately he had a method for determining the volume, and hence the density, of the crown.

Vitruvius tells us that Archimedes was so happy with his discovery that he jumped straight out of the bath and ran naked and dripping down the street shouting “Eureka!” (“I have found it!”) – the original eureka moment.


We rely on our readers to fund Sight's work - become a financial supporter today!

For more information, head to our Subscriber's page.


Sadly, it is unlikely that this is actually how Archimedes solved the problem. Instead, it is more likely that Archimedes used a related idea from hydrostatics (the mechanical properties and behaviour of fluids that are not in motion), which would later become known as Archimedes’ principle.

The principle states that an object placed in a fluid (a liquid or a gas) experiences a buoyant force equal to the weight of fluid it displaces. That is, the larger the submerged object, the more fluid it displaces and, consequently, the larger the upward force it experiences. This explains why huge cargo ships float, providing the weight of the ship and its cargo is less than the weight of water they displace.

Using this idea, all Archimedes needed to do was to take a pan balance with the crown on one side and an equal mass of pure gold on the other. In air, the pans would balance. However, when the scales were placed underwater, a fake crown (which would be larger in volume than the same mass of denser gold) would experience a larger buoyant force as it displaced more water, and its pan would consequently rise.

It is precisely this principle from Archimedes that is used when accurately calculating body-fat percentage.

A subject is first weighed in normal conditions and then reweighed while sitting completely submerged on an underwater chair attached to a set of scales. The differences in the dry and underwater weight measurements can then be used to calculate the buoyant force acting on the person while under water, which in turn can be used to determine their volume, given the known density of water.

Their volume can then be used, in conjunction with figures for the density of fat and lean components of the human body, to estimate the percentage of body fat.

While it clearly isn’t as easy to use as the basic BMI measurements, and there may be better ways to assess body fat, this 2,000-year-old trick can certainly provide a more useful assessment of health risks.The Conversation

Christian Yates is a senior lecturer in mathematical biology at the University of Bath. This article is republished from The Conversation under a Creative Commons license. Read the original article.

Donate



sight plus logo

Sight+ is a new benefits program we’ve launched to reward people who have supported us with annual donations of $26 or more. To find out more about Sight+ and how you can support the work of Sight, head to our Sight+ page.

Musings

TAKE PART IN THE SIGHT READER SURVEY!

We’re interested to find out more about you, our readers, as we improve and expand our coverage and so we’re asking all of our readers to take this survey (it’ll only take a couple of minutes).

To take part in the survey, simply follow this link…

Leave a Reply

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.